08-14-2021-0231 - drafting Alpha Emitter Duoplasmatron Maser Fusor Atom Laser Electron Emitter Ionizer

Alpha Emitter

Duoplasmatron

Maser

Fusor

Atom Laser

electron emitter

------

Neutron Fission Fusion 

Decay Cats

Dirty Nuclear

High Voltage Electrons

Hydrogen Gassing or Interspace Gassing

Ion sources

Plasma Physics

Lead Gamma Ray

etc.

Nuclear

The High Quality Ion Sources from Oxford Applied Research

Quality in design and build. Oxford Applied Research offers a line of RF Ion Sources, DC Ion Sources, Ion Cleaning Guns (Low energy) and a Mini Low Cost Ion Source. Each is well-designed to be the highest quality to handle the needs of research.

RF Ion Sources

When minimum contamination is required for ion-beam etching, sputter deposition or assisted deposition, the Oxford Applied Research RF Ion sources are essential. The inductively-coupled discharge requires no hot cathode, and with exception of the extraction grids, takes place entirely within an ultra-pure ceramic discharge zone.  This allows for the use of reactive gases such as oxygen, hydrogen and nitrogen without the accelerated degradation of the discharge zone observed in filament based ion sources.  Available with a variety of grids to tailor the beam profile.

DC Ion Sources

Simple operation and servicing was in mind when the DC Ion Sources were developed as an extension of the highly successful atom sources from Oxford Applied Research.  The flange mount sources are UHV compatible and primarily for use with Argon. In addition to inert gases, the sources can also be used with O2, H2, and N.  They are highly suitable for Ion beam assisted deposition (IBAD), sputter deposition, etching, and substrate cleaning.

With high beam current density and excellent beam profiles, the DC25 series was developed for the increasing demand for high ion currents at low energies (<20eV).

Ion Cleaning Guns

The LIon50 from Oxford Applied Research is a Low-Energy gas ion source that operates on the principle of electron impact ionization.  Capable of producing ion beams with energies between 30eV and 1KeV with vary narrow energy spread. The Low-Energy ion source is compatible with reactive gases including O2.  Applications including spectroscopy, e-beam neutralization and substrate cleaning.

Mini Low Cost Ion Source

The IG5 is a cold-cathode ion source which operates at low gas flow rates and is ideal for ion cleaning and sputtering applications. The ion beam energy is variable over 1keV-5keV, allowing a range of operating conditions.

Ion Milling System

A small footprint research ion milling system built with quality equipment. Water-cooled specimen holder with possibilities to tilt, rotation and bias.

Oxford Applied Research 

• Valved RF Crackers for Atomic Beam Epitaxy
• VSW Analyzers
• Ion Sources
• Nanocluster Deposition System
• Mini E-beam Evaporator
• Piezoelectric Gas Doser
• RF Atom Sources
• Thermal Gas Cracker

https://www.microphotonics.com/products/oxford-applied-research/ion-sources/?gclid=CjwKCAjwsNiIBhBdEiwAJK4khiPwv2zruyqso8rUnJBoV8NPOZpWDpSJPVJZOvLhT6nDDB_jjF-HtBoCU8oQAvD_BwE

https://www.tifr.res.in/~abap/docs/ECR_abap.pdf

https://en.wikipedia.org/wiki/Electron_gun